Med firmware Version 2.
Maksimal str©ªmstyrke: 30A / 40A (i 10 sek.)
V©¡gt incl. ledninger: 22 gram
Maks. str©ªm for BEC kredsl©ªb: 2 A (Linear) Maks 3 LiPo celler
Antal LiPo celler: 2 til 4 celler
Antal NIHM celler: 6 til 12 celler
Dimensioner: 47x26x7mm
Kan programmeres ved hj©¡lp af USB kabel og Programkort, V2.
Features:
¡Ü The new designed 2nd version software and hardware have many new features.
¡Ü Supports all motor types up to 210,000 rpm(2 Poles motors).
¡Ü Extremely low resistance, factory high quality MosFETs, for high current usage.
¡Ü Adjustable cut-off, either motor stop or reduction in power.
¡Ü DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by
transmitter when switch on.
¡Ü Full protection features including: Low voltage cut-off, Over heating protection,
signal loss auto cut-off.
¡Ü Normal, Soft or Super-Soft start up modes available, for both fixed wing and
helicopter setups.
¡Ü Smooth and accurate throttle control throughout the range.
¡Ü Throttle digital signal sampling, compatible with the signal frequency of 14 ms
Normal mode and 7 ms high-speed mode (HS Mode).
¡Ü Throttle range can be re-calibrated, so suitable for all brands of transmitter.
¡Ü Fully PC programmable when used with Dualsky USB link(#45525).
¡Ü Compatible with programming card(#45200) for easy re-programming at the field!
¡Ü Stable linear BEC power supply, support up to 3S Lipo.
Maksimal str©ªmstyrke: 30A / 40A (i 10 sek.)
V©¡gt incl. ledninger: 22 gram
Maks. str©ªm for BEC kredsl©ªb: 2 A (Linear) Maks 3 LiPo celler
Antal LiPo celler: 2 til 4 celler
Antal NIHM celler: 6 til 12 celler
Dimensioner: 47x26x7mm
Kan programmeres ved hj©¡lp af USB kabel og Programkort, V2.
Features:
¡Ü The new designed 2nd version software and hardware have many new features.
¡Ü Supports all motor types up to 210,000 rpm(2 Poles motors).
¡Ü Extremely low resistance, factory high quality MosFETs, for high current usage.
¡Ü Adjustable cut-off, either motor stop or reduction in power.
¡Ü DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by
transmitter when switch on.
¡Ü Full protection features including: Low voltage cut-off, Over heating protection,
signal loss auto cut-off.
¡Ü Normal, Soft or Super-Soft start up modes available, for both fixed wing and
helicopter setups.
¡Ü Smooth and accurate throttle control throughout the range.
¡Ü Throttle digital signal sampling, compatible with the signal frequency of 14 ms
Normal mode and 7 ms high-speed mode (HS Mode).
¡Ü Throttle range can be re-calibrated, so suitable for all brands of transmitter.
¡Ü Fully PC programmable when used with Dualsky USB link(#45525).
¡Ü Compatible with programming card(#45200) for easy re-programming at the field!
¡Ü Stable linear BEC power supply, support up to 3S Lipo.
Specification£º
Dimensions: 47x 26x 7mm(L x W x D)
Weight: 22g
Number of Cell: NiXX 6-12, 7.2-14.4V
LiPo 2-4, 7.4-14.8V
Resistance(Ri)(Ohm): 0.0059
Max Cont. Current & Max Cont.Output: 30A, 420W
Max Burst Current & Max Burst Output: 40A, 544W
BEC / Dissipative Power: 5V/2A (2W, Linear)
Programmable: Throttle + ProgCARD V2
Input Wires: 100mm, 16AWG, DC3
Output Wires: 65mm, 16AWG, DB3
Signal Wire: 180MM JR
| Titel | Type | Størrelse | Download |
|---|---|---|---|
| Xcontroller-programmering-med-sender.pdf | 75.29KB | Download |
Kunder der har købt dette produkt har også købt